Table of Contents
Advertisement
ZXSDR BS8800 C200 Installation Manual
Steps
Result
50
Confidential and Proprietary Information of ZTE CORPORATION
Note:
In eight E1 cable, 1–4 E1 cables are affixed with labels and others
are not.
F
34 A
/I
I
IGURE
BIS
UB
1. Lead the 75 Ω E1 cable through a cable slot on the top into the
cabinet.
2. Lay out the 75 Ω E1 cable along the vertical cable tray at the
right side of cabinet to the B2 connector (E1 cable connector)
of data cable belonging to the baseband.
Refer to
Installing Data Cable
3. Connect the DB44 connector of 75 Ω E1 cable to the B2 inter-
face (E1 cable interface) of data cable through the
E
.
ND OF STEPS
After installation completed, the appearance of 75 Ω E1 cable is
as shown in
Figure
75 Ω E1 C
NTERFACE
ABLE
for the instruction of data cable.
35.
A
PPEARANCE
SA
module.
Advertisement
Table of Contents
