ZyXEL Communications MAX-207HW2 User Manual page 94

Click ADVANCED ( 進階 ) > NAT Configuration (NAT 設定 ) > Trigger Port to
maintain trigger port forwarding rules for the WiMAX Modem.
Figure 38 ADVANCED ( 進階 ) > NAT Configuration (NAT 設定 ) > Trigger Port
The following table describes the labels in this screen.
Table 33 ADVANCED ( 進階 ) > NAT Configuration (NAT 設定 ) > Trigger Port
LABEL
#
Name ( 名稱 )
Incoming ( 內送埠 )
Start Port( 起
始埠 )
End Port ( 結
束埠 )
Trigger ( 觸發埠 )
User's Guide
DESCRIPTION
The number of the item in this list.
Enter a name to identify this rule. You can use 1 - 15 printable ASCII
characters, or you can leave this field blank. It does not have to be a
unique name.
Enter the incoming port number or range of port numbers you want to
forward to the IP address the WiMAX Modem records.
To forward one port number, enter the port number in the Start Port (
起始埠 ) and End Port ( 結束埠 ) fields.
To forward a range of ports,
• enter the port number at the beginning of the range in the Start
Port ( 起始埠 ) field
• enter the port number at the end of the range in the End Port ( 結束
埠 ) field.
If you want to delete this rule, enter zero in the Start Port (起始埠) and
End Port ( 結束埠 ) fields.
Chapter 8 The NAT Configuration Screens
95