Technical Reference; The Flash Key - ZyXEL Communications MAX-207HW2 User Manual

Chapter 11 The Phone Screens
The following table describes the labels in this screen.
Table 46 VOICE > Phone > Region
LABEL
Region Settings
Call Service
Mode
Apply ( 套用 )
Reset ( 重設 )

11.5 Technical Reference

The following section contains additional technical information about the WiMAX
Modem features described in this chapter.

11.5.1 The Flash Key

Flashing means to press the hook for a short period of time (a few hundred
milliseconds) before releasing it. On newer telephones, there should be a "flash"
key (button) that generates the signal electronically. If the flash key is not
available, you can tap (press and immediately release) the hook by hand to
achieve the same effect. However, using the flash key is preferred since the timing
is much more precise. The WiMAX Modem may interpret manual tapping as
hanging up if the duration is too long
You can invoke all the supplementary services by using the flash key.
132
DESCRIPTION
Select the place in which the WiMAX Modem is located. Do not select
Default.
Select the mode for supplementary phone services (call hold, call
waiting, call transfer and three-way conference calls) that your VoIP
service provider supports.
• Europe Type - use supplementary phone services in European
mode
• USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact
your VoIP service provider.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide