Snmp Options - ZyXEL Communications MAX-207HW2 User Manual

Chapter 14 The Remote Management Screens

14.5.2 SNMP Options

Click TOOLS ( 工具 ) > Remote MGMT > SNMP to control SNMP access to your
WiMAX Modem.
Figure 65 TOOLS ( 工具 ) > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 60 TOOLS ( 工具 ) > Remote MGMT > SNMP
LABEL
SNMP Configuration
Get Community
Set Community
Trap Community
Trap Destination
SNMP
Port
Access Status
156
DESCRIPTION
Enter the Get Community, which is the password for the incoming
Get and GetNext requests from the management station. The default
is public and allows all requests.
Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
Enter the trap community, which is the password sent with each trap
to the SNMP manager. The default is public and allows all requests.
Enter the IP address of the station to send your SNMP traps to.
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the
WiMAX Modem using this service.
User's Guide