Wireless Lan Technical Reference - ZyXEL Communications MAX-207HW2 User Manual

Chapter 6 The WIFI Configuration Screen
The following table describes the labels in this screen.
Table 22 Advanced( 進階 ) > WIFI Configuration(WIFI 設定 ) > MAC Filter
LABEL
Active MAC
Filter ( 啟用
MAC 位址過
濾 )
Filter Action (
過濾動作 )
Set ( 設定 )
MAC
Address
(MAC 位址 )
Apply (套用) Click Apply ( 套用 ) to save your changes back to the WiMAX Modem.
Cancel ( 重
設 )

6.4 Wireless LAN Technical Reference

This section discusses wireless LANs in depth. For more information, see the
appendix.
70
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Allow (允許) to permit access to the WiMAX Modem, MAC addresses
not listed will be denied access to the WiMAX Modem.
Select Deny ( 拒絕 ) to block access to the WiMAX Modem, MAC addresses
not listed will be allowed to access the WiMAX Modem.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the WiMAX Modem in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
Click Cancel ( 重設 ) to reload the previous configuration for this screen.
User's Guide