Advanced Analog Phone Setup - ZyXEL Communications MAX-207HW2 User Manual

The following table describes the labels in this screen.
Table 43 VOICE > Phone > Analog Phone
LABEL
Phone Port
Settings
Outgoing Call Use
SIP1
SIP2
Incoming Call apply to
SIP1
SIP2
Show Advanced
Setup
Apply
Reset

11.2.1 Advanced Analog Phone Setup

Click the Show Advanced Setup button in VOICE > Phone > Analog Phone to
edit advanced settings for the selected phone port.
Figure 53 VOICE > Phone > Analog Phone > Show Advanced Setup
User's Guide
DESCRIPTION
Select the number of a phone port for the configuration in this screen.
Select this if you want this phone port to use the SIP1 account when it
makes calls. If you select both SIP accounts, the WiMAX Modem tries to
use SIP2 first.
Select this if you want this phone port to use the SIP2 account when it
makes calls. If you select both SIP accounts, the WiMAX Modem tries to
use SIP2 first.
Select this if you want to receive phone calls for the SIP1 account on
this phone port. If you select more than one source for incoming calls,
there is no way to distinguish between them when you receive phone
calls.
Select this if you want to receive phone calls for the SIP2 account on
this phone port. If you select more than one source for incoming calls,
there is no way to distinguish between them when you receive phone
calls.
Click this to edit the advanced settings for this phone port. The
advanced settings appear.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 11 The Phone Screens
129