ZyXEL Communications MAX-207HW2 User Manual page 33

Chapter 3 The Setup Screens
Modem. These settings can be configured in the ADVANCED ( 進階 ) > LAN
Configuration (LAN 設定 ) > DHCP Setup screen.
Figure 9 SETUP ( 設定 ) > DHCP Client (DHCP 用戶端 )
The following table describes the labels in this screen.
Table 6 SETUP( 設定 ) > DHCP Client(DHCP 用戶端 )
LABEL
#
IP Address (IP 位址 )
Host Name ( 主機名稱 )
MAC Address (MAC 位址
)
Reserve ( 保留 )
Apply ( 套用 )
Refresh ( 重新整理 )
34
DESCRIPTION
The number of the item in this list.
This field displays the IP address the WiMAX Modem assigned to
a computer in the network.
This field displays the system name of the computer to which
the WiMAX Modem assigned the IP address.
This field displays the MAC address of the computer to which the
WiMAX Modem assigned the IP address.
Select Reserve ( 保留 ) and click Apply ( 套用 ) to have the
WiMAX Modem always map the currently assigned IP address to
the device with this MAC address.
Clear Remain (保留) and click Apply (套用) to allow the WiMAX
Modem to assign a new IP address to this device with this MAC
address when next time the device sends a new DHCP request.
Click this button to update the table data.
User's Guide