Redback A 2078B Operating Manual page 11

Setup
P
ress the "Menu" button on the front of the timer. The unit is now in "Menu Mode" and the screen should display the
"Times Adjust" Screen. This is the first of 5 sub menu screens which are navigated by pressing the up and down buttons
as shown in Fig 3.1. Pressing the Menu button again will exit the menu structure and return the user to the Main Screen.
Main Screen
00:00:00 Mon
NO TIME__00:00:00
Press the UP and DOWN
buttons to scroll up and
down.
Enter
Press the ENTER
button to make your
selection
Menu
Press the MENU
button to exit at any
time.
2.3.1 Times Adjust
After selecting this option, the screen as shown in Fig 2.7 should appear.
This option allows the user to enter the Station (Event) information which includes the event "Turn on time", "Period" and
"Output MP3".
The top left text is the time event number. Up to 50 events can be programmed into the A 4500A. Pressing the "up" and
"down" buttons at this stage will move up and down through the events 1- 50. The top right text indicates that TIME1
(Event1) is currently disabled. The bottom left text refers to the time this event will happen (i.e. the "Start" Time).
Press the "Enter" button to edit this event, or press the "Menu" button to exit.
Pressing the Enter button will take you to the "Editing Time" screen (Refer to fig 2.8). This is where the event "Start" time
is entered. The cursor will be positioned over the hour section of the time. Use the up and down buttons to change the
hour and then press the "Enter Button" to confirm the hour. The cursor will move to the minutes section of the time. Use
the up and down buttons to change the minutes and then repeat the process again for the seconds. Once the seconds have
been updated the screen will change to the "Period" set screen (Refer to fig 2.9) . This is where the length of time the event
should occur, is recorded.
www.altronics.com.au
Redback® A 4500A Evac Controller & Timer
Menu MENU
1)TIMES ADJUST
MENU
2) CLOCK ADJUST
MENU
3)DELETE TIMES
MENU
4)RESET ALL TIMES
MENU
5)EV CHANGEOVER
Select the desired sub menu by pressing the
"Enter" button.
There are 4 options to choose from.
1) Times Ajdust
2) Clock Adjust
3) Delete Times
4) Reset All Times
5) EV Changeover
Fig 2.6
TIME1
00:00:00
Fig 2.7
EDITING
START 00:00:00
Fig 2.8
Redback® Proudly Made In Australia 11
DISABLED
EDIT?
TIME1