Safety Instructions For The Installation According To Ul - Lenze Command Station CS 5000 DVI Operating Instructions Manual

2.3

Safety instructions for the installation according to UL

Original − English
Approval
Underwriter Laboratories (UL), UL508 and CSA C22.2 No. 142−M1987, (UL File Number
E236341)
Ratings
Input 24 V DC, max. 65 W (65 VA)
ƒ
Max. ambient temperature 40 °C
ƒ
Environmental ratings: Type 1 Enclosure
ƒ
Optional communication ratings:
ƒ
– RS232−Connection: max. 3 A
– USB−Connection, PS/2−Connection: max. 1 A
– LAN−Connection: Standard ISDN or RJ45
– VGA−Connection, FBAS−Connection, DVI−Connector, DPL−Connection: max. 4 A
– External Power Supply for DVI/USB Extender: max. 4 A
– Video−DSUB Connection for DVI/USB Extender: max. 4 A
– Data−DSUB Connection for DVI/USB Extender : max. 4 A
O
Warnings!
Conditions of acceptability
ƒ
ƒ
ƒ
ƒ
Field Wiring Markings
Wiring Terminal MSTB 2,5/3−STF−5,08:
ƒ
ƒ
ƒ
BA_CS9000DVI EN 4.0
Safety instructions for the installation according to UL
These devices are evaluated to meet environmental UL Type 1 Enclosure
requirements, when all openings in the enclosure back are closed (filled) by
devices with suitable environmental type ratings. This may be achieved by
use of appropriate supporting beam (support arm system), with suitable
environmental ratings or equivalent means.
Models CS5710 IPC and CS5710 DVI are rated for environmental UL Type 1
Enclosure, when openings in the front are closed with suitable devices (e.g.
buttons, emergency off button, etc.).
The effects of condensation or high humidity shall be reduced by the
application of heat through continuous energization of the equipment, with
interruptions such that cooling to the point of condensation does not occur.
The devices are intended for the use in a pollution degree 2 or controlled
environment only.
Use Copper Wire only.
AWG 18 ... AWG 12 (0.82 mm
Torque 5...7 lb−in (0.5 ... 0.6 Nm)
l
Safety instructions
2 2
... 3.3 mm )
2
11