Disposal Information - Flex XFE 15 15018.0-EC User Manual

Regularly clean the filter cover.

Remove filter cover and blow it out with
dry compressed air.
Gears
NOTE
Do not loosen the screws on the gear head
during the warranty period.
Non-compliance will deem the guarantee
obligations of the manufacturer null and void.
Replacement of wear parts
Change Velcro pad
Remove the battery.

Remove the polishing tool.

Place machine on its back.

Release and remove screws with Torx

wrench (1.).
Remove worn Velcro pad (2.).

24
Remove old bushes.

Remove contaminants from interior.

Insert new bushes (1.).

Fit new Velcro pad and align securing

holes (2.).
Insert screws and tighten with Torx

wrench (3.).
Insert the battery.

Carry out test run. Check for imbalances

and vibrations.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
NOTE
Only the tools released by FLEX may
be used.
For other accessories, in particular tools
and polishing aids, see the manufacturer's
catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com

Disposal information

WARNING!
Render redundant power tools unusable:
mains operated power tool by removing
–
the power cord,
battery operated power tool by removing
–
the battery.
EU countries only
Do not throw electric power tools
into the household waste!
XFE 15 150 18.0-EC