7) Mount the controller box cover [2] using 12 screws
[1].
[1]
[2]
Fig. 2-9
8) Fit the 2 cable clamps [1] each to the removed up-
per rear cover and the lower rear cover.
[1]
Fig. 2-10a
[1]
Fig. 2-10b
[1]
[1]
[1]
– 5 –
9) Mount the upper rear cover using 7 screws [1].
Fig. 2-11
10) Fit the included 2 stepped screws [1] to the lower
rear cover; then, hook the PS print server unit [2]
on the screws.
[2]
Fig. 2-12
11) Using the included 4 RS tightening screws [1] to
secure the PS print server unit [2] in place.
[1]
Fig. 2-13
[1]
[2]
Need help?
Do you have a question about the Color Network Printer Unit-D1 and is the answer not in the manual?