Canon Color Network Printer Unit-D1 Installation Procedure page 7

2.3 Setting Up the Server Unit
1) Press [Print] tab on the host machine's control panel.
In case [Print] tab is not displayed, press [Print] tab
after press arrow tab.
2) Press [Printer status/Setting].
In response, the machine will automatically bring
up the Setup menu: select at least [Server Setup],
[Network Setup], and [Printer Setup] in order, stor-
ing appropriate data items as you move on.
Fig. 2-19
For instance, as you set up items under [Server Setup],
the machine will bring up a message asking if you
want to store the settings you have made; press [yes]
to store the settings. You will have to make the selec-
tions in specific order to move to subsequent items.
Server Setup:
Name the server, and make other settings.
Fig. 2-20
Network Setup:
Make port, protocol, and service settings.
Printer Setup:
Make the print queue setting.
3) Press [Done] under the Setup menu.
In response, the machine will automatically restart.
Checking the Operation After
3
Making Settings
Print out the test page and setup page as follows to
check that the connection between the server unit and
the host machine is correct and the server unit has prop-
erly been set up:
1) Press [Print] tab on the host machine's control panel.
In case [Print] tab is not displayed, press [Print] tab
after press arrow tab.
2) Press [Printer status/Setting].
3) Make the following selections on the operation
panel: Functions>Print Pages>PS Test Page>and
Configuration.
– 7 –
Fig. 2-21
Fig. 2-22