Canon Color Network Printer Unit-D1 Installation Procedure page 6

12) Using the communications cable [1], connect the
open I/F PCB and the PS print server unit [2].
[2]
Fig. 2-14
13) Using the cross Ethernet cable [1], connect the
PS print server unit and the host machine.
Fig. 2-15
14) Connect the DDIS cable [1] to the server unit and
the reader unit; then, fix it in place using the 2 wire
saddles [2].
[2]
Fig. 2-16
[1]
[1]
[1]
15) Bundle the cross Ethernet cable and the commu-
nications cable using the 4 cable clamps [1] of the
host machine.
[1]
16) Connect one end of the power cable [1] to the PS
print server unit [2] and the other end to the wall
outlet.
17) Connect the host machine's power cable (for the
wall outlet).
18) Turn on the host machine and the server unit.
– 6 –
Fig. 2-17
[2]
[1]
Fig. 2-18