Download Print this page

Advertisement

R2 Confidential
iP100
Technical Reference
This manual provides technical information necessary for servicing the applicable product.
Since the manual contains confidential information, limit the use of this manual within the sales
companies.
Information on maintenance and disassembly / reassembly procedures of the applicable product is given
in the separate Service Manual and Parts Catalog. Please refer to them when necessary.
QY8-2308-000
Rev. 00
March, 2008
Canon Inc.
(1/22)

Advertisement

   Related Manuals for Canon iP100

   Summary of Contents for Canon iP100

  • Page 1

    R2 Confidential iP100 Technical Reference This manual provides technical information necessary for servicing the applicable product. Since the manual contains confidential information, limit the use of this manual within the sales companies. Information on maintenance and disassembly / reassembly procedures of the applicable product is given in the separate Service Manual and Parts Catalog.

  • Page 2: Table Of Contents

    1. SERVICE MODE ..........................3 2. CLEANING MODE AND AMOUNT OF INK PURGED ...............7 3. PRINT MODE ............................8 4. FAQ (PROBLEMS SPECIFIC TO THE IP100 AND CORRECTIVE ACTIONS) .......13 5. SPECIAL NOTES ON SERVICING....................15 6. BLOCK DIAGRAM ...........................16 7. CONNECTOR LOCATION AND PIN LAYOUT ................17...

  • Page 3: Service Mode

    1. SERVICE MODE For details of each service mode, refer to the "iP100 Service Manual." < Service Mode Operation Procedures > With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.

  • Page 4

    accuracy - Check 2: EEPROM information - Check 3: Improper mixture of colors (Ink must be ejected from all nozzles.) - Check 4: Line feeding accuracy (There must be no streaks or unevenness.) - Check 5: Straight line accuracy (There shall be no remarkable dot mis-alignment on a line.) - Check 6: Process inspection information - Check 7:...

  • Page 5: Eeprom Information Print

     Manual print head alignment by user (M_REG)  Camera Direct Print-supported device connection record (CDIN = Camera Direct Insert, PB = Canon PictBridge-supported camera, OPB = Other PictBridge-supported camera)  Bluetooth-supported device connection record (BTIN=BlueTooth Insert)  Feed pages (Total, Plain Paper, High Resolution Paper & Matte Photo Paper , Photo Paper Pro &...

  • Page 6

     Not used in servicing HR + MP= Total number of pages of High Resolution Paper & Matte Photo Paper fed PR + SP + GP + GL = Total number of pages of Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus Glossy II, and Glossy Photo Paper fed L+4x6+KG = Total number of print pages of L size paper, 4"x6"...

  • Page 7: Cleaning Mode And Amount Of Ink Purged

    2. CLEANING MODE AND AMOUNT OF INK PURGED < Cleaning > To prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing (when the cleaning flag is on), except in the following cases: - Cleaning on arrival: Performed when the printer cover is closed.

  • Page 8: Print Mode

    3. PRINT MODE Default setting: Selectable in the printer driver Main tab: Custom setting: Ink used: Japan: Overseas: PigBK: BCI-19BK PGI-35BK BCI-19CL (large droplet) CLI-36CL (large droplet) BCI-19CL (large droplet) CLI-36CL (large droplet) BCI-19CL (large droplet) CLI-36CL (large droplet) BCI-19BK (large droplet) CLI-36CL (large droplet) C’...

  • Page 9

    Matte Photo Paper Print quality Standard High Print control 4 passes, Bi 8 passes, Bi Ink used C/M/Y/K/C’/M’/K’/c/m C/M/Y/K/C’/M’/K’/c/m Resolution 1200x2400 1200x2400 Glossy Photo Paper Print quality Standard High Print control 4 passes, Bi 8 passes, Bi Ink used C/M/Y/K/C’/M’/K’/c/m C/M/Y/K/C’/M’/K’/c/m Resolution 1200x2400...

  • Page 10

    Resolution 600x600 600x600 < Borderless Printing via Computer > Printer driver Custom setting Paper type Item 5 Fast 1 Fine Plain Paper Print quality Standard Print control 1 pass, Bi Ink used C/M/Y Resolution 600x1200 Photo Paper Pro Print quality Standard High Custom...

  • Page 11

    Ink used C/M/Y/K/C’/M’/K’/c/m C/M/Y/K/C’/M’/K’/c/m Resolution 1200x2400 1200x2400 < Duplex Printing via Computer > Quality setting Paper type Item 5 Fast 1 Fine Plain paper Print quality Custom Fast Standard High Print control 1 pass, Bi 1 pass, Bi 1 pass, Bi 4 passes, Bi Ink used PigBK/C/M/Y...

  • Page 12

    Photo Paper Plus Glossy II Print quality Standard Print control 8 passes, Bi Ink used C/M/Y/K/C’/M’/K’/c/m Resolution 1200x2400 < Print Beam Printing > (Direct Printing from a camera-equipped mobile phone via wireless communication) Quality setting Paper type Item Fast Standard High Plain paper Print quality...

  • Page 13: Faq (problems Specific To The Ip100 And Corrective Actions)

    4. FAQ (Problems Specific to the iP100 and Corrective Actions) No. * Phenomenon Condition Cause Corrective action Possible call or complaint Carriage position error The print head lock lever The print head lock lever is not 1) Press both lock buttons on the...

  • Page 14

    No. * Phenomenon Condition Cause Corrective action Possible call or complaint Soiling on paper If paper is curled significantly, - Eliminate the curl of the paper. - Paper gets smeared (on the print head will contact the - Print within the recommended the printed side).

  • Page 15: Special Notes On Servicing

    In accordance with the change of the legal regulations, the following information are listed. <For Germany> A lithium battery is installed in the iP100. Please be cautious of the following: - At repair: Risk of explosion if battery is replaced by an incorrect type.

  • Page 16: Block Diagram

    6. BLOCK DIAGRAM (16/22)

  • Page 17: Connector Location And Pin Layout

    7. CONNECTOR LOCATION AND PIN LAYOUT <iP100 Main PWB> CN102 (to Li Battery) Signal name Function Input/Output BATT_VDD Battery driver power supply Ground CN201 (to Pict Bridge) Signal name Function Input/Output VBUS VBUS power supply D- signal D+ signal S-GND...

  • Page 18

    CN203 (to PC) Signal name Function Input/Output VBUS VBUS power supply D- signal D+ signal S-GND signal GND F-GND Frame GND F-GND Frame GND F-GND Frame GND F-GND Frame GND CN301 (to Carriage PWB J3) Signal name Function Input/Output Head logic ground CH_B Carriage encoder phase B Head logic ground...

  • Page 19

    CN303 (to Carriage PWB J2) Signal name Function Input/Output Head driver power supply HVDD_3.3V Head driver power supply 3.3V VSSFG Head logic frame ground B_VH Head drive power supply B_VH Head drive power supply B_VH Head drive power supply B_VH Head drive power supply B_GNDH Head drive power supply ground...

  • Page 20

    CN406 (to LF Encoder) Signal name Function Input/Output LF_ENC_B LF encoder phase B VSEN_3.3V LF encoder power supply 3.3V LF encoder power ground LF_ENC_A LF encoder phase A CN407 (to AP Encoder) Signal name Function Input/Output APCL_ENC_B APCL encoder phase B VSEN_3.3V APCL encoder power supply 3.3V APCL_ENC_A...

  • Page 21

    <Panel PWB Unit> J101 (from Main PWD) Signal name Function Input/Output Ground RESUME Resume switch LED_RSM Resume LED LED PWR Power LED POWER Power switch PE sense VSEN_PE PE sensor power supply Ground <USB-A PWB Unit> Signal name Function Input/Output VBUS VBUS power supply D- signal...

  • Page 22

    <USB-BlueTooth Harness Ass’y> Signal name Function Input/Output VBUS VBUS power supply D- signal D+ signal S-GND Signal ground F-GND Frame ground Signal name Function Input/Output VBUS VBUS power supply D- signal D+ signal S-GND Signal ground (22/22)

Comments to this Manuals

Symbols: 0
Latest comments: