Cleaning And Maintenance; Safety Advice - Bartscher 103.065 Instruction Manual

WARNING! Danger of burns!
Always wear protective gloves when moving the device, as the surface may be
very hot!
Removing plates
•
Remove plates as necessary.
•
If guests are to remove plates themselves, ensure that the temperature is set
appropriately low (approx. 60° C).
•
Only remove the plastic covers when loading or removing plates, to avoid loss of heat.
Turning the device off
•
If the device is to be unused, turn it off with the ON/OFF switch located at the front
of the device.
•
Remove the plug from its socket and wind the power cable around the cable hook.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
- 34 -