Installation And Connection - Bartscher 103.065 Instruction Manual

5.2 Installation and connection

•
Unpack the device and dispose of the packaging. Remove the protective film from the
device.
•
Place the device on a flat, secure surface that can support the device's weight and is
resistant to high temperatures.
•
Never place the device on a flammable surface.
•
Never leave the device near an open flame, electric furnace, coal furnace or any
other sources of heat.
•
The device can be used in ambient temperatures up to 32° C at normal humidity.
•
Do not leave the device in the vicinity of any steam-producing equipment.
WARNING! Electrical hazard!
Moisture may cause the device to short-circuit or result in electric shock.
WARNING!
Always secure the device using the brake. Failure to secure the device can cause it
to move unexpectedly and may result in injuries or damage to the device.
•
Do not use the device on ships, in campers or on aircraft.
•
Do not place metallic objects or other things on the device that may leave traces of
rust.
•
The socket used for the device must be secured to a minimum of 16A. Only connect
the device directly to a grounded socket; do not use an extension cord or multiple
plug socket.
•
Place the device so that the plug is easily accessible and if necessary can be quickly
disconnected from its power source.
- 30 -