Cleaning The Suction Filter; Cleaning The Product Suction Filter; J J; Replacement Of The Pumping - Larius VEGA 23:1 Operating And Maintenance Instruction Manual

Daily check that the ring nut is covered with hydrau-
lic oil (rif. 16325); the oil improves the sliding of
the piston and prevent the product, coming out
from sealing gaskets, to dry once the equipment
is stopped.

CLEANING THE SUCTION FILTER

• Disassemble and clean the product suction filter (I3).
PRODUCT SUCTION FILTER

CLEANING THE PRODUCT SUCTION FILTER

• Disassemble and clean the high pressure filter for product
output (I4).
I4
VEGA 23:1
I3
PRODUCT OUTPUT FILTER
REPLACEMENT OF THE

J J

PUMPING UNIT GASKETS
• unscrew the filter group (J1) from the pump housing (J2).
J1
• unscrew the three self-locking nuts (J3) and remove the
pumping unit (J4), by unscrewing it from the motor piston rod.
17
J2
J4 J3