Table of Contents
Advertisement
CARRIAGE AND UNPACKING
D D
•
Strictly respect the orientation of the package indicated
externally by labels or symbols.
•
Before installing the equipment, prepare an environment
suitable in terms of space, proper lighting, clean and
smooth floor.
All unloading and handling operations of the
equipment are at user's care who should pay the
utmost attention in order to avoid any damage to
people or things.
The unloading operations shall be carried out by
skilled and trained personnel (truck, crane ope-
rators, etc..) with suitable hoisting means able to
bear the weight of the package and to meet all
safey standards.
The personnel must be equipped with suitable
protective devices.
•
The manufacturer declines any liability relevant to the unload
and carriage of the equipment to the workplace.
•
Check the integrity of the package upon receipt. Remove
the equipment from the packaging and check that no
damage has occured during transport.
Should any damaged components be found, promptly
contact LARIuS and the shipping agent. The maximum
deadline to notify the damage is 8 days from the date of
equipment receipt. The communication must be made
by registered mail with acknowledgement addressed to
LARIuS and to the carrier.
The disposal of packaging materials, at user's care,
shall be performed in compliance with applicable re-
gulations in force in the country where the equipment
is installed.
It is however good practise to dispose the packaging
materials in the most environment-friendly way.
SAFETY INSTRUCTIONS
E E
•
THE EmPLOyER SHALL PROVIDE TO DuLy TRAIN THE
PERSONNEL REGARDING THE RISKS Of ACCIDENTS,
THE SAfETy DEVICES AND THE GENERAL ACCIDENT
PREVENTION GuIDELINES PROVIDED By THE INTERNA-
TIONAL DIRECTIVES AND By THE LAW IN fORCE IN THE
COuNTRy WHERE THE uNIT IS INSTALLED, IN ADDITION
TO THE STANDARDS RELEVANT TO ENVIRONmENTAL
POLLuTION.
•
PERSONNEL STAff SHALL CAREfuLLy RESPECT THE
ACCIDENT PREVENTION STANDARDS IN fORCE IN THE
COuNTRy WHERE THE uNIT IS INSTALLED, IN ADDITION
TO THE RuLES RELEVANT TO ENVIRONmENTAL POLLu-
TION.
VEGA 23:1
Carefully read the following instructions before using
the equipment.
Keep these instructions with care.
Tampering or unauthorized replacement of one or
more parts composing the equipment, the use of
accessories, tools, consumables other than those
recommended by the manufacturer, might represent
a risk of injury and raise the manufacturer from any
liability and penalty.
•
KEEP THE WORKING AREA IN GOOD ORDER.
fAILuRE IN RESPECTING THIS mAy CAuSE
RISK Of ACCIDENTS.
•
ALWAyS KEEP A GOOD BALANCE AVOIDING
uNSAfE POSITIONS.
•
BEfORE STARTING OPERATION, CAREfuL-
Ly CHECK THAT THERE ARE NO DAmAGED
COmPONENTS AND THAT THE EquIPmENT
IS ABLE TO OPERATE CORRECTLy.
•
ALWAyS fOLLOW THE SAfETy INSTRuC-
TIONS AND REGuLATIONS IN fORCE.
•
KEEP uNAuTHORIZED PERSONNEL AWAy
fROm THE WORKING AREA.
•
NEVER EXCEED THE mAXImum OPERATING
PRESSuRE
NEVER DIRECT THE GuN TOWARDS
•
yOuRSELf OR ANyONE ELSE.
IN TOuCH WITH THE JET mIGHT CAuSE
SERIOuS WOuNDS. IN CASE Of WOuNDS
DERIVED By THE GuN JET, ImmEDIATELy
PROVIDE fOR mEDICAL ASSISTANCE SPE-
CIfyING THE PRODuCT yOu WERE uSING.
NEVER uNDERESTImATE THE WOuND CAu-
SED By THE INJECTION Of A fLuID.
•
ALWAyS DISCONNECT THE POWER SuPPLy
AND DISCHARGE THE PRESSuRE IN THE
CIRCuIT BEfORE PERfORmING ANy CON-
TROL OR REPLACEmENT Of EquIPmENT
COmPONENTS.
•
NEVER mODIfy ANy EquIPmENT COmPO-
NENT. PERIODICALLy CHECK THE COmPO-
NENTS Of THE SySTEm. REPLACE DAmAGED
OR WORN COmPONENTS, If ANy.
•
CHECK AND TIGHTEN ALL fITTINGS BETWE-
EN THE PumP, THE fLEXIBLE HOSE AND THE
GuN BEfORE uSING THE EquIPmENT.
10
GETTING
Advertisement
Table of Contents
