Technical Data - Siemens SITRANS L Series Operating Instructions Manual

Technical data

Note
Device specifications
Siemens makes every attempt to ensure the accuracy of these specifications but reserves
the right to change them at any time.
Power
Performance
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
LVS100 19 to 230 V AC, ±10 %, 50 to 60 Hz, 22 VA / 19 to 40 V DC,
±10 %, 2 W
LVS200 19 to 230 V AC, +10 %, 50 to 60 Hz, 1.8 VA / 19 to 55 V DC,
+10 %, 1.5 W
18 to 50 V DC 3-wire PNP
7 to 9 V DC (requires NAMUR switch amplifier) NAMUR IEC
60947-506, 2-wire
8/16 mA or 4 to 20 mA; 12.5 to 35 V DC, 2-wire
Measuring frequency
LVS100 standard
LVS200 standard
liquid/solid interface
version
enhanced sensitivity
option
Signal delay probe uncovered to
covered
probe covered to un-
covered
Relay delay adjustable up to 30 seconds
(DPDT version)
(LVS200)
Sensitivity high or low, switch selectable
Minimum material density
LVS100 standard version
LVS200 standard version
standard version with
low density fork
liquid/solid interface
version
Maximum particle LVS100
size
LVS200
approx. 200 Hz
approx. 125 Hz
approx. 350 Hz
approx. 90 Hz
approx. 1 second
approx. 1 to 2 seconds
approx. 30 g/l (1.9 lb/ft³)
approx. 20 g/l (1.2 lb/ft³)
approx. 5 g/l (0.3 lb/ft³)
approx. 50 g/l (3 lb/ft³)
8 mm (0.32")
10 mm (0.39")
7
38