Siemens SITRANS L Series Operating Instructions Manual page 41

Alarm output
Mechanical
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
LVS100 version with 2 relays
LVS200 version with 1 relay
version with 2 relays
3-wire PNP
mA output (build-up
detection)
Process Connection
LVS100 thread
thread material
LVS200 thread
thread material
flanges
optional sliding bushing with R 2" (BSPT) or NPT (Taper)
Tri-clamp
Tines tine material
(PTFE
are available upon
special request. Con-
tact your local Siemens
representative for or-
dering information.)
Enclosure construction
conduit entry
ingress protection
Weight standard version, no
extensions
solids/liquids, no ex-
tensions
DPDT relay fail-safe: high or low,
switch selectable
relay 8 A at 250 V AC, non-
inductive / relay 5 A at 30 V DC,
non-inductive
SPDT relay fail-safe: high or low,
switch selectable
relay 8 A at 250 V AC, non-
inductive / relay 5 A at 30 V DC,
non-inductive
DPDT relay fail-safe: high or low,
switch selectable
relay 8 A at 250 V AC, non-
inductive / relay 5 A at 30 V DC,
non-inductive
open collector: permanent load
maximum 0.4 A, short circuit and
overload protected; turn-on voltage:
max. 50 V (reverse protection)
8/16 mA or 4 to 20 mA; resolution 4
to 20 mA, ±0.1 mA
R 1½" (BSPT); 1¼" NPT (Taper)
ANSI B 1.20.1
stainless steel 316 Ti (1.4581) or
304 (1.4301) for specific configura-
tions
1½" NPT (Taper), R 1½" (BSPT)
stainless steel 304 (1.4301) or op-
tional stainless steel 316 Ti
(1.4571)/ 316L (1.4404)
DN 100 PN6, DN 100 PN16, 2", 3",
4" ASME 150 lb flanges
thread
2" (DN50) ISO 2852
stainless steel 316Ti (1.4571)/ 316L
(1.4581)
coated tines
1
epoxy-coated aluminum
2 x M20x1.5, or 2 x ½" NPT
Type 4X/NEMA 4X/IP66
2.0 kg (4.4 lb)
1.9 kg (4.2 lb)
39