Sensitivity - Siemens SITRANS L Series Operating Instructions Manual

5.4

Sensitivity

If the measured material tends to cake or build up, the sensitivity adjustment switch can be
set to position A to decrease the sensitivity of the probe (factory setting is position B).
The sensitivity for interface applications should be set to position B, while the setting for
high-flow applications should be position A.
LVS100
①
②
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
sensitivity adjustment:
B = factory setting
A = decreased sensitivity
FSH/FSL adjustment or High/Low Alarm setting
Connecting
5.4 Sensitivity
27