Assembly - Siemens SITRANS L Series Operating Instructions Manual

5.6.3

Assembly

Suggested tools:
● medium Phillips or 6 to 8 mm (¼") flat screwdriver
● 3 mm (1/8") flat screwdriver
● wire cutters
● wire strippers
● terminal crimper
● 36 mm open end wrench
● pipe wrench
①
②
③
1. Open the enclosure lid; remove electronics module.
2. Lead the sensor cable through the customer supplied 1" tube and enclosure.
3. Assemble the fork assembly, the pipe extension, and the enclosure using the 36 mm
open end wrench. Seal the pipe threads with an appropriate sealant.
Note
Do not turn fork assembly. Do not bend the fork during assembly.
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
Enclosure
Customer supplied pipe extension
Fork assembly
5.6 SITRANS LVS200 Pipe extension version
Connecting
33