Avertissements De Sécurité Importants; Transport Et Stockage; Préparation - LEGRAND 1.1KVA User Manual

When changing batteries, install the same number and same type of batteries or battery packs.
For UPS with internally mounted battery:
Instructions shall have sufficient information to enable the replacement of the battery with a suitable
•
manufacturer and catalogue number.
Safety instructions to allow access by Service Personnel shall be stated in the installation/service
•
handbook.
If batteries are to be installed by Service Personnel, instructions for interconnections, including terminal
•
torque, shall be provided.
Do not attempt to dispose of batteries by burning them. This could cause an explosion.
Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It may
be toxic.
Only replace the fuse with the same type and amperage to avoid fire hazards.
Do not disassemble the UPS system.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This is a product for commercial and industrial applications. In second environment installations,
restrictions or additional measures may be needed to prevent disturbances.
Avertissements de sécurité importants
Respectez tous les avertissements et consignes d'utilisation de ce manuel et conservez-le pour référence
ultérieure. Ne faites pas fonctionner cet appareil avant de lire attentivement toutes les informations de
sécurité et les instructions d'utilisation.

Transport et stockage

Transportez le système UPS uniquement dans son emballage d'origine pour le protéger contre les
chocs.
L'onduleur doit être stocké dans une pièce ventilée et sèche.
Préparation
De la condensation peut se produire si le système UPS est directement déplacé d'un environnement
froid à un environnement chaud. Le système UPS doit être absolument sec avant d'être installé. Veuillez
prévoir au moins deux heures pour que le système d'ASI s'adapte à l'environnement.
N'installez pas l'onduleur à proximité d'eau ou dans un environnement humide.
5