Sony HDC3500 Operating Instructions Manual page 9

h CALL button
When this button is pressed, the red tally lamp of the
RCP-1500/1000 series Remote Control Panel or the
MSU-1000-series Master Setup Unit will light. Use to call the
operator of the RCP or MSU.
Operation panel
UCJ model:
For USA, Canada, East Asia and other
countries
b c
A
LIGHT
ON
OFF
PGM1 PGM2
LEVEL MIC
INCOM
REAR ON
FRONT OFF
a
PGM1 control
PGM1 PGM2
LEVEL MIC
INCOM
REAR ON
FRONT OFF
INTERCOM 1
INCOM level control
LEVEL/MIC switch
a INTERCOM 1 and INTERCOM 2 controls and switches
There are separate PGM1 and PGM2 controls, line select/
receive MIX select switch, LEVEL/MIC switch, and INCOM
level control for both intercom line 1 and intercom line 2.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
LEVEL/MIC switch
REAR/ON: The intercom headset microphone is turned
on. The intercom audio listening level is adjusted
with the INCOM level control.
REAR/OFF: The intercom headset microphone is turned
off. The intercom audio listening level is adjusted
with the INCOM level control.
FRONT/OFF: The intercom headset microphone is turned
off. The intercom audio listening level is adjusted
with the INCOM level control and the INTERCOM
LEVEL control on the front of the camera (page 8).
d
RET/ASSIGNABLE
B C
DISP
MENU
PGM1 PGM2
LEVEL MIC
INCOM
PROD PROD
REAR ON
MIX MIX
FRONT OFF
ENG ENG
PGM2 control
PGM1 PGM2
LEVEL MIC
INCOM
PROD PROD
REAR ON
MIX MIX
FRONT OFF
ENG ENG
INTERCOM 2
Line select / Receive
MIX select switch
INCOM level control
Adjust the intercom audio listening level.
Line select / Receive MIX select switch
Select the intercom line.
PROD: Producer line
ENG: Engineer line
MIX: Receive mixed PROD/ENG audio. Select the
intercom talk line from the menu.
The default intercom line setting is ENG.
b LIGHT switch
Set to ON to illuminate the operation panel.
c RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
d RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu operations
using RET/ASSIGNABLE button C.
9