Sony HDC3500 Operating Instructions Manual page 38

OPERATION
Page title Item
Page No.
<SWITCH ASSIGN1> GAIN
13 (U09)
ASSIGNABLE
VF ASSIGN
VF OUT SW
Settings
L: –6, –3, 0, 3, 6, 9, 12 dB
M: –6, –3, 0, 3, 6, 9, 12 dB
H: –6, –3, 0, 3, 6, 9, 12 dB
OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2, VF
DETAIL, 5600K, FAN MAX,
D.EXTENDER, VF ASSIGN SW1,
VF ASSIGN SW2, SPIRIT LEVEL
INDICATOR, FOCUS ASSIST
INDICATOR, PinP, RET1 SW
TOGGLE, RET2 SW TOGGLE,
RET3 SW TOGGLE, CURSOR
ALL OFF, FLAG, AWB
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, VF DETAIL,
5600K, FAN MAX, D.EXTENDER,
VF ASSIGN SW1, VF ASSIGN
SW2, SPIRIT LEVEL INDICATOR,
FOCUS ASSIST INDICATOR,
PinP, RET1 SW TOGGLE, RET2
SW TOGGLE, RET3 SW
TOGGLE, CURSOR ALL OFF,
FLAG, AWB
OFF, VF ASSIGN SW1, VF
ASSIGN SW2, PinP
VF OUT RGB, FOCUS POSITION
METER
38
Description
UCJ model only.
When HDLA is attached: OFF, EXTENDER, 5600K,
FAN MAX, D.EXTENDER, PinP, FLAG
Note
When you turn D.EXTENDER ON or OFF, noise
may be generated. This is not a malfunction.
D.EXTENDER does not operate when a 2x speed
motion format is selected.
CE model only.
When HDLA is attached: OFF, EXTENDER, 5600K,
FAN MAX, D.EXTENDER, PinP, FLAG
Note
When you turn D.EXTENDER ON or OFF, noise
may be generated. This is not a malfunction.
D.EXTENDER does not operate when a 2x speed
motion format is selected.
Displayed only when HDLA is attached.
Displayed only when HDLA is attached. (When
FOCUS POSITION METER is set, VF OUT SW (R/
G/B) can be used for registering/displaying Marker
1/2/3.)