Sony HDC3500 Operating Instructions Manual page 45

PAINT
Page title Item
Page No.
<SATURATION> SATURATION
P06
LOW KEY SAT
RANGE
TEST
<KNEE> K POINT
P07
K SLOPE
KNEE
KNEE MAX
KNEE SAT
AUTO KNEE
<WHITE CLIP> W CLIP
P08
ABS
<DETAIL 1> DETAIL
P09
LEVEL
LIMITER [M]
LIMITER [WHT]
LIMITER [BLK]
CRISP
LEVEL DEPEND
ABS
<DETAIL 2> H/V RATIO
P10
FREQ
MIX RATIO
KNEE APT
DTL H/V MODE
ABS
<SKIN DETAIL> SKIN DTL
P11
SKIN GATE
NATURAL SKINDTL
ZOOM LINK
CH SW
HUE
PHASE
WIDTH
SAT
LEVEL
Y LIMIT
Settings
–99 to +99, 0
ON, OFF
–99 to +99, 0
LOW, L.MID, H.MID, HIGH
ON, OFF
OFF, SAW, 10STEP
R/G/B/M: –99 to +99, 0
R/G/B/M: –99 to +99, 0
ON, OFF
ON, OFF
–99 to +99, 0
ON, OFF
OFF, AUTO
POINT LIMIT –99 to +99, 0
SLOPE –99 to +99, 0
–99 to +99, 0
ON, OFF
ON, OFF
–99 to +99, 0
–99 to +99, 0
–99 to +99, 0
–99 to +99, 0
–99 to +99, 0
–99 to +99, 0
ON, OFF
–99 to +99, 0
–99 to +99, 0
–99 to +99, 0
–99 to +99, 0
ON, OFF
H/V, V only
ON, OFF
OFF, 1, 2, 3, (MAT)
OFF, ON
OFF, ON
TELE 0 to 99
WIDE 0 to 99
1: (ON), 2/3: ON, OFF
1/2/3: Execute via ENTER.
1/2/3: 0 to 359
1/2/3: 0 to 90, 29
1/2/3: –99 to +99, –89
1/2/3: –99 to +99, 0
1/2/3: 0 to 99
Description
R, G, B, and M (master) values can be
independently set.
Absolute values are displayed in ABS mode except
for M (master).
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Highlighted: ABS (Absolute) mode
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Highlighted: ABS (Absolute) mode
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Absolute value is displayed in ABS mode.
Highlighted: ABS (Absolute) mode
1, 2, 3: The skin gate function can be turned on for
the specified channel only.
(MAT): Displayed when GATE of <MULTI MATRIX>
is ON.
Sets the skin tone detail function independently for
each channel. (Channel 1 is always set to ON.)
Absolute values are indicated for LEVEL only in
ABS mode.
45