Sony HDC3500 Operating Instructions Manual page 10

CE model:
For Europe and South Asia
b c
A
LIGHT
ON
OFF
ENG PROD
MIC
PROD
LINE1
OFF ENG
a
PROD control
ENG
control
ENG PROD
MIC
LINE1 PROD
ENG
OFF
INTERCOM 1
MIC LINE1 MIC LINE2
switch switch
a INTERCOM 1 and INTERCOM 2 controls and switches
The reception level controls are common to intercom 1 and
intercom 2. The talk lines can be set independently for
intercom 1 and intercom 2.
ENG (engineer line) control:
Adjust the intercom audio listening level of the engineer line.
PROD (producer line) control
Adjust the intercom audio listening level of the producer line.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
MIC LINE1 (intercom microphone line 1) switch
Select the talk line for intercom 1.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom line
1.
ENG: To talk over the engineer line
MIC LINE2 (intercom microphone line 2) switch
Select the talk line for intercom 2.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom line
2.
ENG: To talk over the engineer line
d
RET/ASSIGNABLE
B C
DISP
MENU
PGM1 PGM2
MIC
TRACKER LEVEL
PROD
LINE2
REAR
OFF ENG
FRT
PGM2 control
PGM1
control
PGM1 PGM2
MIC
TRACKER LEVEL
LINE2 PROD
REAR
ENG
OFF
FRT
INTERCOM 2
TRACKER
control
LEVEL switch
TRACKER control
Adjust the intercom audio listening level at the TRACKER
connector (page 11) on the connector panel when using the
connector for intercom.
LEVEL switch
REAR: The intercom audio listening level is adjusted with
the controls on this panel.
FRT: The intercom audio listening level is adjusted with
the INTERCOM LEVEL control on the front of the
camera.
b LIGHT switch
Set to ON to illuminate the operation panel.
c RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the button
on the <ROTARY ENCODER ASSIGN> page on/off. When
the return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
d RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the button
on the <ROTARY ENCODER ASSIGN> page on/off. When
the return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu operations
using RET/ASSIGNABLE button C.
Connector panel
a
b
c
RET CTRL
FRONT MIC
d
LINE
DC IN 10.5-17V
e
a EARPHONE jack (4-pole mini jack)
Connect to a headset, or earphones with microphone (3-pole/
4-pole earphones), to input/output the intercom audio signal.
For 4-pole earphones, the intercom line is linked to the
INTERCOM1 setting.
Turn the microphone function on/off using HEADSET MIC
(page 42) in the OPERATION menu. The default setting is
OFF.
10
REMOTE
DC OUT
EARPHONE
CRANE
TRACKER
PROMPTER
/GEN
LOCK
AES/EBU
MIC MIC
LINE
TEST
+48V +48V
OUT
OFF OFF
AUDIO IN
CH1 CH2
SDI
MONI
m
f
g
h
i
j
k
l