Sony HDC3500 Operating Instructions Manual page 52

FILE
Page title Item
Page No.
<SCENE FILE> 1
F02
2
3
4
5
STORE
01
STANDARD
READ (USB t CAM)
WRITE (CAM t USB) Execute via ENTER.
FILE ID
CAM CODE
DATE
DISSOLVE
<REFERENCE> STORE FILE
F03
STANDARD
READ (USB t CAM)
WRITE (CAM t USB) Execute via ENTER.
FILE ID
CAM CODE
DATE
<LENS FILE> STORE FILE
F04
No.
NAME
F NO
CENTER MARKER
<OHB FILE> STORE FILE
F05
Settings
Execute via ENTER.
01 to 32
Execute via ENTER.
Execute via ENTER.
Max.14 characters
Camera code
Date
OFF, ON
SPEED 0.2 to 2.8 (0.2 steps), 3 to 10
(1 steps), 0.2
Execute via ENTER.
Execute via ENTER.
ALL PRESET Execute via ENTER.
Execute via ENTER.
Max.14 characters
Camera code
Date
Execute via ENTER.
1 to 17, 1
F1.0 to F3.4, F1.7
H POS –20 to +20, 0
V POS –20 to +20, 0
STORE Execute via ENTER.
Execute via ENTER.
Description
Stores and reads scene files (paint data):
When storing a file in camera memory, specify the
number before executing STORE.
When reading, only specify the number.
Reads the standard paint data.
Loads 32 scene files from a USB drive to internal
memory.
Writes 32 scene files in the camera's memory to a
USB drive.
Enters a comment for the scene files to be written to
a USB drive.
See "To specify a character string" on page 24.
Display only
Display only
Switching a scene file seamlessly.
Stores the current settings of the reference file items
in the reference file in internal memory.
Reads the standard values in the reference file in
internal memory.
Resumes the factory-preset reference file.
Loads a reference file from a USB drive.
Writes the current settings of the reference file items
as a reference file to a USB drive.
Enters a comment for the reference file to be written
to a USB drive.
See "To specify a character string" on page 24.
Display only
Display only
The center marker is not included.
1 to 16: When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17: When using a serial lens
Changeable only when using a non-serial lens.
Changeable only when using a non-serial lens.
Sets and stores the center marker position:
H POS: Increasing the value moves the position to
the right.
V POS: Increasing the value moves the position
downwards.
Stores the offset values of items specific to the
CCD. (No repeated store operation is necessary
even if the CCD is reattached)
52