Sony HDC3500 Operating Instructions Manual page 26

4
Move the arrow marker (
(this operation is unnecessary if no item exists on the
page, as shown in the figure for step 3) then push on
the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
EDIT FUNCTION
INSERT
c
MOVE
DELETE
BLANK
5
Move the arrow marker (
the MENU SEL knob/ENTER button.
The page with the last item added appears.
<SW STATUS>
FLARE :
GAMMA :
BLK GAM : OFF
KNEE :
WHT CLIP:
DETAIL :
LVL DEP :
SKIN DTL: OFF
MATRIX : OFF
6
Add the items.
1 Turn the MENU SEL knob/ENTER button until the
page that has the desired items appears then push on
the MENU SEL knob/ENTER button.
2 Turn the MENU SEL knob/ENTER button to move the
arrow marker (,) to the desired item then push on the
MENU SEL knob/ENTER button.
The USER 2 EDIT page appears again, displaying the
newly added item.
7
Add the remaining items by repeating steps 4 to 6.
You can add up to 10 items on one page.
To delete items from a page
Proceed as follows:
1
Move the arrow marker (
and push on the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
2
Select "DELETE," and push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again, and the
message "DELETE OK? YES
right.
3
To delete, turn the MENU SEL knob/ENTER button to
move the arrow marker (
MENU SEL knob/ENTER button.
To change the order of items on a page
Proceed as follows:
1
Turn the MENU SEL knob/ENTER button to move the
arrow marker ( ) to the item to be moved then push
,
on the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
) to the item to be added
,
ESC
) to "INSERT" and push on
,
P01 ESC
ON
c
ON
ON
ON
ON
ON
) to the item to be deleted,
,
NO" appears at the upper
,
) to "YES," and push on the
,
2
Select MOVE then push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again.
3
Turn the MENU SEL knob/ENTER button to move the
arrow marker ( ) to the position where you wish to
,
move the item then push on the MENU SEL knob/
ENTER button.
ITEM MOVE
xx
VF OUT
c
VF DETAIL
MARKER
CURSOR
ZEBRA SW
ASSIGNABLE
z
The item selected in step 1 moves to the position that you
selected in step 3.
In the above example, "ASSIGNABLE" is moved to the top
and the other items are moved down one line.
To insert a blank line
Proceed as follows:
1
Turn the MENU SEL knob/ENTER button to move the
arrow marker ( ) to the item above which you wish to
,
insert a blank line.
The EDIT FUNCTION screen appears.
2
Select "BLANK" then push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again, and a
blank line is inserted above the specified item.
Note
You cannot insert a blank line on a page where 10 items have
already been registered.
Editing by pages
You can add a page to the USER menu, delete a page from
the USER menu, or replace pages, using the EDIT PAGE of
the USER MENU CUSTOMIZE menu.
To add a page
Proceed as follows:
1
Select "USER MENU CUSTOMIZE" on the TOP MENU
screen.
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears. If the menu has been used before, the last
accessed page appears.
26
ESC
: COLOR
: OFF
: ON
: OFF
: OFF
: 1
: OFF