Editing The User Menu - Sony HDC3500 Operating Instructions Manual

By selecting INS on the line below the character list, you
can enter a space at the cursor position.
Selecting DEL deletes the character at the cursor
position.
You can return to step 1 without changing the character by
selecting RET.
If you enter the permitted maximum number of characters
(up to the stop mark at the right end of the line), the cursor
moves to ESC on the line below the character list.
To register the new string you have set, select END and
push on the MENU SEL knob/ENTER button.
To restore the previous string, select ESC and push on
the MENU SEL knob/ENTER button.
To return a menu item to its standard value
Select the menu item to be returned to its standard value then
hold the MENU SEL knob/ENTER button pressed for 3
seconds while the arrow marker (
If "10 SEC CLEAR" has been set to ON on the <FILE CLEAR>
page of the FILE menu, you can return the setting in the
reference file for the item being selected to the factory-set
value by holding the MENU SEL knob/ENTER button pressed
for another 10 seconds.
To end menu operations
Set the DISPLAY switch to OFF.

Editing the USER Menu

You can select desired pages and items from the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus and register them to the USER menu.
If you specify pages or items frequently used for the USER
menu, you can easily call and use them.
The following pages are included on the factory-set USER
menu:
Menu page title USER
menu
No.
<VF OUT>
<VF DETAIL>
<FOCUS ASSIST>
<VF DISPLAY>
<'!' IND>
<VF MARKER>
<CURSOR>
<ZEBRA>
<SWITCH ASSIGN1>
<SWITCH ASSIGN2>
<HEADSET MIC>
<OUTPUT FORMAT>
<TEST OUT>
<SDI OUT>
<ROM VERSION>
) is displayed.
,
Source menu / page No.
U01 OPERATION 12
U02 OPERATION 04
U03 OPERATION 07
U04 OPERATION 01
U05 OPERATION 02
U06 OPERATION 03
U07 OPERATION 09
U08 OPERATION 08
U09 OPERATION 13
U10 OPERATION 14
U11 OPERATION 18
U12 MAINTENANCE M11
U13 MAINTENANCE M12
U14 MAINTENANCE M13
U15 DIAGNOSIS D03
For the items on each page, see the corresponding source
menu page in the table in "Menu List" on page 28.
The USER MENU CUSTOMIZE menu allows you to configure
a USER menu that consists only of pages and items that you
need, by your adding, deleting or replacing pages.
Editing by items
The USER MENU CUSTOMIZE menu allows you to add a
new page to the USER menu and add desired items to the
page.
While the EDIT page contains factory-preset items, the USER
1 EDIT to USER 19 EDIT pages are all blank in their initial
state. You can register up to 10 items, including blank lines, on
each of these pages.
To add items to a page
Proceed as follows.
1
Set the DISPLAY switch from the OFF position to the
MENU position while holding the MENU SEL knob/
ENTER button pressed.
The TOP MENU screen appears.
2
Turn the MENU SEL knob/ENTER button to move the
arrow marker ( ) to "USER MENU CUSTOMIZE" then
,
push on the MENU SEL knob/ENTER button.
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears.
CONTENTS
xx
01.EDIT PAGE
02.USER 1 EDIT
03.USER 2 EDIT
c
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
If the USER MENU CUSTOMIZE menu has been used
before, the page last accessed appears.
3
If the CONTENTS page is displayed, turn the MENU
SEL knob/ENTER button to move the arrow marker
( ) to any of USER 1 EDIT to USER 19 EDIT then push
,
on the MENU SEL knob/ENTER button to display the
page.
If a different page is displayed, turn the MENU SEL
knob/ENTER button until the desired page appears,
then push on the MENU SEL knob/ENTER button to
select the page.
Example: When you select the USER 2 EDIT page
USER 2 EDIT
c
25
E00 TOP
E03 TOP