Start The Mower - Snapper ESPV21675 Quick Setup Instructions Manual

21” variable speed rear discharge walk behind mowers european models

Hide thumbs Also See for ESPV21675:

Table of Contents

Start the mower

•

Move the cutting height adjust lever (A, Figure 4)

to the desired cutting height.

•

Set the mower to mulch, discharge or bag.

(See 3-in-1 instructions.)

•

Hold the bail control (A, Figure 5) against the

drive handle.

•

Pull the recoil rope handle (B) until the

engine starts.

•

To engage the drive system, slowly pull the

drive lever (C) back. To increase ground speed,

slowly pull the drive lever farther back. To

decrease ground speed, slowly release the

drive lever.

•

To disengage the drive system, release the

drive lever.

•

To stop the engine and blade, release the

bail control.

Figure 4

Figure 5

Table of Contents