Page 1
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
Operation Maintenance Troubleshooting Exploded View and Parts List Warranty TECHNICAL DATA Model Number: 6377 Motor: 120 V, 60 Hz, 5A Speed: 600 to 1500 RPM (no load) Triangular Pad Size (along one edge): 11-1/4 inch Triangular Sandpaper Size (along one edge):...
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1.
GENERAL SAFETY RULES 12. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the OFF position before plugging in the power cord. 13. REMOVE ADJUSTMENT TOOLS. Always make sure all adjustment tools are removed from the saw before turning it on. 14.
KNOW YOUR DRYWALL SANDER Hose Connection Port Power Switch Hook & Loop Round Base Pad Handle Extension Connection Adapter Variable Speed Adjustment Wheel Locking Clasp Motor SPECIFIC RULES FOR THE DRYWALL SANDER 1. Do not force the machine to do a job that is not intended such as rough grinding, brushing, etc. 2.
ASSEMBLY WARNING: DO NOT attempt to plug in or operate this tool until it is completely assembled and installed according to the instructions. 1. Unfold the front and back of the drywall sander. Push the clasp fully into the closed position (Fig. A). 2.
OPERATION WARNING: This tool is for indoor use only. DO NOT expose to rain or use in damp locations 1. Hold the machine firmly with both hands. DO NOT hold the machine by the machine’s head to avoid injury. 3. Before operation, make sure every fastener and nut has been properly engaged and that the sanding pad has been properly installed and aligned.
MAINTENANCE REPLACING THE SHAFT CAP The plastic shaft cap on the back of the triangular base pad (Fig. G - 1) and the round base pad is a consumable item that needs to be routinely replaced. Spare caps are included on the back of the trian- gular pad (Fig.
Page 10
EXPLODED VIEW AND PARTS LIST Part Number Part Description Part Number Part Description 6377-015A Gearbox Assembly 6369-074 Aluminum Pipe Insert 6377-009 Locking Shaft 6369-075 Cable Pressing Plate 6377-015A Gearbox Assembly 6369-076 Left Sub-Handle 11-14 6377-012A Dust Collection Assembly 6369-077 Aluminum Pipe...
LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
Need help?
Do you have a question about the 6377 and is the answer not in the manual?
Questions and answers