Copy the engineering software to the
desktop
1. Copy the engineering software "SHF16 Install
Tool Software" to the desktop.
2. Open the folder and select "EasyDownload_
v1.83" (for updating PLC).
3. Open the folder and select "PM_2.0.5.11" (for
updating HMI).
Install the HMI updating software
1. Open "PM_2.0.5.11" folder.
2. Open the file, "OemKeyV3_00.txt", and copy
the key serial number.
3. Select "PM Designer Version 2.0.5.11" to
install the software.
4. Input the serial number in "Serial Number"
5. Select a destination folder.
6. Press Install button to install the software.
7. After the installation process is finished,
please click "finish" to complete the
installation.
RBCBioscience
66