Replace The Heater Module - RBCBioscience MagCore HF16 Plus Training Manual

Replace the heater module

Open the front door and take out the waste box, cartridge rack and T-rack.
1. Screw off the four screws of the heating module (2 mm Hex wrench).
2. Pull out the temperature probe of the module.
3. Remove the connection wire of the heater.
4. Remove the protection switch wire of the heater.
5. Take out the heating module from the bottom.
6. Install a new heating module and lock back all the parts.
1
2
3
4
RBCBioscience
42