Table of Contents
Advertisement
(1) Take away and store the products which are NO need to dilute.
(2) Place the 200ul SP tips into W4 of the products which need dilution.
Cancel
Next Step
10X Dilution
B.Prepare to dilute
1. Please take out the elution products
which are no need to be diluted.
2. Please put a new 200μl SP Tip in the
W4 corresponding to the sample to
be diluted.
3. Press Next Step to continue the
process.
Confirm the position of the tips and products.
Start
10X Dilution
Please confirm and press Start to dilute it.
10X Dilution Processing...
10X Dilution
Diluting.
Completed
Print Data
Review Data
Program Completed
The diluting process is completed; please
press Review Data to show the measured
value after dilution.
OK
Back
Back
Stop
OK
OK
Barcode
A260
1234567890
2.364
ug / uL ( DNA )
A280
118.2
1.154
260 / 280
Date
2.05
2014 / 01 / 30 09:19:59
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Prev
Next
Optical Data
C. Record and save the measured
values.
1. Insert the USB Flash Drive and then
press the Save button to save the
current measured values after the
USB icon shows in the status bar.
Please take out the USB Flash Drive
and then you can perform other
operations after the icon of USB Flash
Drive disappears.
2. The file saved last time and this file are
all data obtained from this test.
If the file saved last time is lost, you
can retrieve this file according to the
instructions of optic test data chapter.
Please save the data in the USB Flash Drive
and transfer to computer, or the data in
the USB Flash Drive may be overwritten
later.
File name:
OpticsSampleData.cvs
Previous file name:
Pre_OpticsSampleData.cvs
Save
Back
RBCBioscience
20
Advertisement
Table of Contents
