Table of Contents
Advertisement
Name and Function of Parts
Front Panel
a
CALL
RCP/MSU
INPUT
POWER
4K
HD HDR
A
B
e
USB connector
a Number plate
A supplied number plate can be attached (see following
diagram).
b Channel status indicator
Displays the status of channel A/B.
CALL lamp: Lights up when the CALL button is pressed on an
external control device (MSU-1000 Master Setup Unit or
RCP-1500 series Remote Control Panel).
RCP/MSU lamp: Lights up when communication is
established with an external control device (MSU-1000
Master Setup Unit or RCP-1500 series Remote Control
Panel).
INPUT lamp: Lights up when HD input is selected for the
channel and a video signal is input on an HD input
connector. Also lights up when 4K input or HD×4 input is
selected for the channel and a video signal is input on a 4K
input connector. The lamp flashes if the input video signal
is incomplete or is not received correctly, regardless of
whether the input setting is 4K, HD, or HD×4. The lamp is
not lit in all other cases.
Remote control number indicator: Displays the remote
control number set for the channel. Not lit if the remote
control number is 0. The remote control number can be set
to 0 to 96.
b
c
d
MENU
REF IN
CALL
UNLOCK
RCP/MSU
DISP
CANCEL
COM ERROR
INPUT
CH A
CH B
FAN STOP
CONFIGURATION
MENU
ENTER
MENU LOCK
2020
2SI
HDR
2020 HDR 2020
OFF
ON
IN
4K OUT
HD OUT
NETWORK
f
g h
c MENU control block
DISP/MENU lever and indicator
CANCEL/ENTER lever
MENU
DISP
CANCEL
ENTER
MENU
Control knob
DISP/MENU lever and indicator: Used to display the status
and menu. The indicator lights up when the menu is
displayed.
CANCEL/ENTER lever: Used to cancel/enter settings when
the menu is displayed. The CANCEL lever is used to
cancel the selected item or to move up one level in the
menu hierarchy. The ENTER lever is used to select an item
or execute an item. For details about usage, see "Menu
Settings" (page 15).
Control knob (rotary encoder): Used to move the cursor
within a page and to change the setting of the selected
item when the menu is displayed.
Pushing the control knob has the same function as setting
the CANCEL/ENTER lever to ENTER.
d Status display indicators
REF IN (green): Indicates the input of reference sync signal.
UNLOCK (red): When lit and a reference sync signal is
connected, this indicates that the unit is not locked to the
reference sync signal.
When lit and a reference sync signal is not connected, this
indicates that the unit is not locked to the 4K or HD channel
A input signal, whichever is selected in the menu.
COM ERROR (red): Lights up for a fixed time when an error
occurs during communication with an external control
device (MSU-1000 Master Setup Unit or RCP-1500 series
Remote Control Panel) connected to channel A or B.
FAN STOP (red): Indicates the internal fan has stopped.
e POWER switch and indicator
Turns the system power supply on/off to the unit and an
external device (such as RCP-1500 series Remote Control
Panel) connected to the REMOTE connector. Switch to "?" to
turn the power on, and switch to "a" to turn the power off.
The indicator lights up when power is turned on.
f CONFIGURATION indicator
Displays the internal configuration status of the unit. The
channel A setting is displayed at the top, and the channel B
setting at the bottom. When set to through mode, the LEDs of
the corresponding channels are all turned off.
IN setting
4K: Lights up when the input setting is 4K or HD×4.
HD: Lights up when the input setting is HD or HD×4.
HDR: Lights up when the input OETF setting is HDR.
2020: Lights up when the input color space setting is BT.2020.
When channel A is used as the channel B input, the IN lamps
(4K, HD, HDR, 2020) for channel B are all off.
6
Advertisement
Table of Contents
