Table of Contents
Advertisement
SDRtHDR
Configure settings for converting from SDR to HDR.
Page name
Page No.
Item
<BLACK>
CHANNEL A
S31
Set value
SETTING MODE
SONY SYSTEM CAMERA,
OTHERS
MASTER BLACK
–99.9 to 99.9, 0.0
HDR BLACK
–99.9 to 99.9, 0.0
OFFSET
INPUT BLACK
–99.9 to 99.9, 5.0
LEVEL (SDR)
ADJUSTMENT
ENTER to execute
MODE
OUTPUT BLACK
–99.9 to 99.9, 5.0
LEVEL (HDR)
Meaning
Select whether the source of the input video
signal is a Sony made system camera or not
Set the master black value of the input video
signal source
Fixed to absolute value of 0.0 when DISPLAY
REFERRED on the <SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
SONY SYSTEM CAMERA)
Difference in black level between input SDR
signal and output HDR signal
Fixed to 0.0 when DISPLAY REFERRED on the
<SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
SONY SYSTEM CAMERA)
Input signal black level
Fixed to 0.0 when DISPLAY REFERRED on the
<SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
OTHERS)
Input signal black level adjustment mode
To adjust the black level of the input signal, set
ADJUSTMENT MODE to ON, adjust INPUT
BLACK LEVEL so that the black level of the
output signal is 0 IRE, then set ADJUSTMENT
MODE to OFF
(Displayed only when SETTING MODE is set to
OTHERS)
Output signal black level
Fixed to 0.0 when DISPLAY REFERRED on the
<SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
OTHERS)
32
Advertisement
Table of Contents
