Sony HDRC-4000 Operation Manual page 33

Hdr production converter unit
Hide thumbs Also See for HDRC-4000:
Table of Contents

Advertisement

Page name
Page No.
Item
<BLACK>
CHANNEL B
S31
ABS
<SDRtHDR GAIN>
CHANNEL A
S32
CHANNEL B
Set value
SETTING MODE
SONY SYSTEM CAMERA,
OTHERS
MASTER BLACK
–99.9 to 99.9, 0.0
HDR BLACK
–99.9 to 99.9, 0.0
OFFSET
INPUT BLACK
–99.9 to 99.9, 5.0
LEVEL (SDR)
ADJUSTMENT
ENTER to execute
MODE
OUTPUT BLACK
–99.9 to 99.9, 5.0
LEVEL (HDR)
ENTER to execute
SDRtHDR GAIN
0.0dB to –15.0dB
HDR
CONTRAST
SDRtHDR GAIN
0.0dB to –15.0dB
HDR
CONTRAST
Meaning
Select whether the source of the input video
signal is a Sony made system camera or not
Set the master black value of the input video
signal source
Fixed to absolute value of 0.0 when DISPLAY
REFERRED on the <SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
SONY SYSTEM CAMERA)
Difference in black level between input SDR
signal and output HDR signal
Fixed to 0.0 when DISPLAY REFERRED on the
<SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
SONY SYSTEM CAMERA)
Input signal black level
Fixed to 0.0 when DISPLAY REFERRED on the
<SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
OTHERS)
Input signal black level adjustment mode
To adjust the black level of the input signal, set
ADJUSTMENT MODE to ON, adjust INPUT
BLACK LEVEL so that the black level of the
output signal is 0 IRE, then set ADJUSTMENT
MODE to OFF
(Displayed only when SETTING MODE is set to
OTHERS)
Output signal black level
Fixed to 0.0 when DISPLAY REFERRED on the
<SYSTEM> page is ON
(Displayed only when SETTING MODE is set to
OTHERS)
Highlighted display: ABS (absolute indication)
mode
SDR-to-HDR conversion gain
Displays the HDR percentage corresponding to
SDR 100% after conversion using SDRtHDR
GAIN
Displays the number of nits corresponding to
SDR 100% after conversion when DISPLAY
REFERRED on the <SYSTEM> page is ON
(display only)
SDR-to-HDR conversion gain
Displays the HDR percentage corresponding to
SDR 100% after conversion using SDRtHDR
GAIN
Displays the number of nits corresponding to
SDR 100% after conversion when DISPLAY
REFERRED on the <SYSTEM> page is ON
(display only)
33

Advertisement

Table of Contents
loading

Table of Contents