Table of Contents
Advertisement
Appendix
Precautions
If the unit is suddenly taken from a cold to a warm location, or
if ambient temperature suddenly rises, moisture may form on
the outer surface of the unit and/or inside of the unit. This is
known as condensation. If condensation occurs, turn off the
unit and wait until the condensation clears before operating the
unit. Operating the unit while condensation is present may
damage the unit.
The fan and battery are consumable parts that will need
periodic replacement.
When operating at room temperature, a normal replacement
cycle will be about 5 years. However, this replacement cycle
represents only a general guideline and does not imply that
the life expectancy of these parts is guaranteed. For details on
parts replacement, contact your dealer.
The life expectancy of the electrolytic capacitor is about 5
years under normal operating temperatures and normal usage
(8 hours per day; 25 days per month).
If usage exceeds the above normal usage frequency, the life
expectancy may be reduced correspondingly.
Do not push the mesh portion of the front panel with your
fingers or sharp objects.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND
RESULTING FROM A FAILURE TO IMPLEMENT PROPER
SECURITY MEASURES ON TRANSMISSION DEVICES,
UNAVOIDABLE DATA LEAKS RESULTING FROM
TRANSMISSION SPECIFICATIONS, OR SECURITY
PROBLEMS OF ANY KIND.
Depending on the operating environment, unauthorized third
parties on the network may be able to access the unit. When
connecting the unit to the network, be sure to confirm that the
network is protected securely.
Operating environment
• Avoid high-temperature rooms and near sources of heat.
• Do not place in locations with strong electric or magnetic
field.
• Dry location with good ventilation.
• Avoid locations exposed to sunlight or strong lighting.
Avoid violent impacts
Dropping the unit, or otherwise imparting a violent shock to it,
is likely to cause it to malfunction.
Do not cover with cloth
While the unit is in operation, do not cover it with a cloth or
other material. This can cause the temperature to rise, leading
to a malfunction.
After use
Set the POWER switch to OFF.
Care
If the body or panels of the unit become dirty, wipe them with
a dry cloth. For severe dirt, use a soft cloth steeped in a small
amount of neutral detergent, then wipe dry. Do not use volatile
solvents such as alcohol or thinners, as these may damage
the finish.
To prevent electromagnetic interference from
portable communications devices
The use of portable telephones and other communications
devices near this camera can result in malfunctions and
interference with audio and video signals.
It is recommended that the portable communications devices
near this camera be powered off.
Error Messages
When an error is detected in the unit, the following messages
may be displayed on the HD monitor output.
Note
Display the menu or status screen to view messages.
Error message
TEMP WARNING
PLD NG
SDI LOCK WARNING
INPUT SDI RATE UNMATCH
FRAME RATE UNMATCH
47
Meaning
Internal temperature error.
Internal PLD error.
Internal SDI-PLD error.
SDI INPUT error.
Input signal and menu setting
frame rate mismatch.
Advertisement
Table of Contents
