The Labview Example Code - Agilent Technologies X Series Startup Manual

2.
X-Series Measurement Applications for Modular Instruments Startup Guide
Note:
Two warnings may appear (as displayed below) about the changed .NET assembly versions.
You may ignore these warnings and click
The front panel of the M9000_LabVIEW.vi has a single input field called
3.
Enter the resource configuration name you set up earlier (for example MyVSA, or M9391), during
launching of M90XA, in the
simulate hardware.
Click the Run button to run VI. This launches the GUI of the M90XA Software.
4.
To close the M90XA GUI, click the STOP button on the front panel of the M9000_LabVIEW.vi. This will
5.
also stop the LabVIEW example.

The LabVIEW Example Code

When you access the Block Diagram by using the
code:
Close
requiredResourceName
M9000_LabVIEW.vi Front Panel
.
requiredResourceName
field. Check the Simulate box if you want to
.
, you can view the example
46