Download Print this page

Network Connection Cable - Silvercrest USB TRAVELLER KIT User Manual And Service Information

Hide thumbs

Advertisement

Table of Contents

Network Connection Cable

Use
- For connecting a computer to a network
- Maximum length: 130cm
To be able to connect your computer to a network you must first have an integrated network card. This
provides a port where the 8-pin modular jack of the network connection cable can be inserted. If you are
not sure whether your computer already has this network port, please refer to the technical
documentation of your computer.
Pull both connectors simultaneously to make the cable the required length. Please see winding
mechanism notes on page 7.
Insert either end of the connection cable into the network port of the computer and connect the other
end of the network connection cable to a switch (or network hub).
!
Please note that although the modem connection cable (page 10) is very similar in type, it has
however a 6-pin modular jack, model "RJ11".
Fig.:
8-pin modular jack of the
network connection cable,
model: RJ45
11

Advertisement

Table of Contents
loading

  Also See for Silvercrest USB TRAVELLER KIT

  Related Manuals for Silvercrest USB TRAVELLER KIT