Figure 9.15 Dos Configuration Page - Asus SL1200 User Manual

Chapter 9 - Configuring Firewall/NAT Settings
9.6.3.2 Access DoS Configuration Page – (Firewall -> Advanced
-> DoS)
Log into Configuration Manager as administrator. Click Firewall ->
Advanced -> DoS. The DoS Configuration page displays as shown in
Figure 9.15.
When you open the DoS Configuration page, a list of default DoS
protection is also displayed at the bottom half of the configuration page
such as those shown in Figure 9.15. These protections are enabled by
default when firewall is enabled.
9.6.3.3 Configuring DoS Settings
By default, most DoS protection against all supported attack types are
enabled. Figure 9.15 shows the default configuration for DoS settings.
You may check or un-check individual type of attack defense to disable or
enable protection against that specific type of attack.
Figure 9.15. DoS Configuration Page
89
ASUS SL1200