Table of Contents
Advertisement
Chapter 9 - Configuring Firewall/NAT Settings
Field
Range
Begin Enter the starting IP address of the range
IP Pool
Destination IP
This option allows you to set the destination network to which this rule should apply.
Use the dropdown list to select one of the following options:
Any
IP Address, Subnet,
Range and IP Pool
Source Port
This option allows you to set the source port to which this rule should apply. Use the
drop-down list to select one of the following options:
Any
Single
Port Number Enter the source port number
Range
Begin Enter the starting port number of the range
Destination Port
This option allows you to set the destination port to which this rule should apply. Use
the drop-down list to select one of the following options:
Any
Single, Range
Description
This option allows you to include a range of IP addresses for
applying this rule. The following fields become available for
entry when this option is selected:
End Enter the ending IP address of the range
This option allows you to associate a pre-configured IP pool
with this rule. The available IP pool can be selected from the
IP pool drop-down list.
This option allows you to apply this rule to all the computers
in the destination network, such as those on the Internet.
Select any of these and enter details as described in the
Source IP section above.
Select this option if you want this rule to apply to all
applications with an arbitrary source port number.
This option allows you to apply this rule to an application with
a specific source port number.
Select this option if you want this rule to apply to applications
with this port range. The following fields become available for
entry when this option is selected.
End Enter the ending port number of the range
Select this option if you want this rule to apply to all
applications with anarbitrary destination port number.
Select any of these and enter details as described in the
Source Port section above.
ASUS SL1200
73
Advertisement
Table of Contents
