Table of Contents
Advertisement
Chapter 11 - System Management
11.5 SNMP Setup
Simple Network Management Protocol (SNMP) is used for network
management. You may use the SNMP configuration page to enable or
disable the SNMP support.
11.5.1 SNMP Configuration Parameters
Table 11.1 describes the configuration parameters available for SNMP
setup.
Table 11.1. Fixed DHCP Lease Configuration
Field
SNMP
RO Community Name
RW Community Name
Trap Address
11.5.2 Configuring SNMP
1. To open the SNMP configuration page, click the System Management
-> SNMP menu.
2. Click on the Enable or Disable radio button to enable or disable the
SNMP support.
3. Enter the RO (read only) and R/W (read and write) community names.
4. Enter the IP address of the SNMP management station that receives
trap messages from the ASUS SL 1200.
134
Description
Click on the Enable or Disable radio button to enable or
disable the SNMP support.
Community string is a clear text string that is used as
password between the SNMP management station and the
ASUS SL1200. This Read Only community name is used
by the SNMP management station to read the settings in the
ASUS SL1200.
Community string is a clear text string that is used as
password between the SNMP management station and the
ASUS SL1200. This Read and Write community name is
used by the SNMP management station to read and config-
ure the settings in the ASUS SL1200.
Trap message is sent by the ASUS SL1200 to tell the SNMP
management station that something has happened on
the router. This field is used to enter the IP address of the
SNMP management station that is supposed to receive trap
messages from the ASUS SL1200.
ASUS SL1200
Advertisement
Table of Contents
