Table of Contents
Advertisement
Chapter 9 - Configuring Firewall/NAT Settings
Field
Single
Port Number Enter the source port number
Range
Begin Enter the starting port number of the range
Destination Port
This option allows you to set the destination port to which this rule should apply. Use
the drop-down list to select one of the following options:
Any
Single, Range
Service
Protocol
This option allows you to select protocol type from a drop-down list. Available settings
are All, TCP, UDP, ICMP, AH and ESP. If you select "service" for the destination port,
this option will not be available.
Description
This option allows you to apply this rule to an application with
a specific source port number.
Select this option if you want this rule to apply to applications
with this port range. The following fields become available for
entry when this option is selected.
End Enter the ending port number of the range
Select this option if you want this rule to apply to all
applications with an arbitrary destination port number.
Select any of these and enter details as described in the
Source Port section above.
This option allows you to select any of the pre-configured
services from the drop-down list instead of the destination
port. The following are examples of services:
BATTLE-NET, PC-ANYWHERE, FINGER, DIABLO-II,
L2TP, H323GK, CUSEEME, MSN-ZONE, ILS, ICQ_2002,
ICQ_2000, MSN, AOL, RPC, RTSP7070, RTSP554,
QUAKE, N2P, PPTP, MSG2, MSG1, IRC, IKE, H323, IMAP4,
HTTPS, DNS, SNMP, NNTP, POP3, SMTP, HTTP, FTP,
TELNET.
Note: Service is a combination of protocol and port number.
They appear after you add them in the "Firewall Service"
configuration page.
ASUS SL1200
67
Advertisement
Table of Contents
