Creating A User-Defined Hold At The Aircraft Present Position - Garmin G1000 Cockpit Reference Manual

Flight Planning
3) Press the MENU Key, highlight 'Hold At Wpt', and press the ENT Key. The
HOLD AT window appears with the course field highlighted.
4) Use the FMS Knobs to edit the entry course, and press the ENT Key.
5) Use the small FMS Knob to select 'INBOUND' or 'OUTBOUND' course
direction, and press the ENT Key.
6) Use the small FMS Knob to select 'TIME' or 'DIST' length mode, and press
the ENT Key.
7) Use the FMS Knobs to edit the length, and press the ENT Key.
8) Use the small FMS Knob to select 'RIGHT' or 'LEFT' turn direction, and
press the ENT Key.
9) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),
and press the ENT Key.
10) Press the ENT Key while 'LOAD?' is highlighted to add the hold into the
flight plan.

CREATING A USER-DEFINED HOLD AT THE AIRCRAFT PRESENT POSITION

1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active
Flight Plan Window (PFD).
2) Press the MENU Key, highlight 'Hold At Present Position', and press the
ENT Key. The HOLD AT window appears with the course field highlighted.
3) If desired, use the FMS Knobs to edit the entry course, and press the ENT
Key.
4) Use the small FMS Knob to select 'INBOUND' or 'OUTBOUND' course
direction, and press the ENT Key.
5) Use the small FMS Knob to select 'TIME' or 'DIST' length mode, and press
the ENT Key.
6) Use the FMS Knobs to edit the length, and press the ENT Key.
7) Use the small FMS Knob to select 'RIGHT' or 'LEFT' turn direction, and
press the ENT Key.
8) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),
and press the ENT Key.
9) Press the ENT Key while 'ACTIVATE?' is highlighted to create an Offroute
Direct-to hold waypoint and activate the hold.
36
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100
190-00645-07 Rev. A
™