Removing A User-Defined Hold At An Off-Route Direct-To; Invert An Active Flight Plan; Remove A Departure, Arrival, Approach, Or Airway From A Flight Plan - Garmin G1000 Cockpit Reference Manual

Flight Planning

REMOVING A USER-DEFINED HOLD AT AN OFF-ROUTE DIRECT-TO

1) Press a Direct To Key to display the DIRECT TO Window (PFD or MFD).
2) Press the MENU Key to display the PAGE MENU with the cursor on the
'Cancel Direct-To NAV' selection.
3) Press the ENT Key. The holding pattern is removed.

INVERT AN ACTIVE FLIGHT PLAN

1) Press the FPL Key to display the active flight plan.
2) Press the MENU Key to display the Page Menu.
3) Turn the large FMS Knob to highlight 'Invert Flight Plan'.
4) Press the ENT Key. The original flight plan remains intact in its flight plan
catalog storage location.
5) With 'OK' highlighted, press the ENT Key to invert the flight plan.
REMOVE A DEPARTURE, ARRIVAL, APPROACH, OR AIRWAY FROM A FLIGHT
PLAN
1) Press the FPL Key to display the active flight plan. Press the FMS Knob to
activate the cursor.
Or:
a) Turn the small FMS Knob to select the Flight Plan Catalog Page.
b) Press the FMS Knob to activate the cursor.
c) Turn the large FMS Knob to highlight the desired flight plan.
d) Press the EDIT Softkey.
2) Turn the large FMS Knob to highlight the title for the approach, departure,
arrival, or airway to be deleted. Titles appear in white directly above the
procedure's waypoints.
3) Press the CLR Key to display a confirmation window.
4) With 'OK' highlighted, press the ENT Key to remove the selected procedure
or airway.
38
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100
190-00645-07 Rev. A
™