Garmin G1000 Cockpit Reference Manual page 139

11) Turn the small FMS Knob to select the System Status Page.
12) Press the Display Database Selection Softkey to show database information
for each display (MFD1 DB or PFD1 DB). Verify the correct database cycle
information is shown for each database for each display.
Updating Terrain, FliteCharts, and ChartView Databases
1) With system power OFF, remove the Supplemental Data Card from the
bottom card slot of the MFD and PFD.
2) Copy the updated terrain database to both Supplemental Data Cards. Copy
the updated FliteCharts or ChartView database to one Supplemental Data
Card.
3) Insert the updated Supplemental Data Cards into the bottom card slot of
the MFD and PFD. The Supplemental Data Card containing the FliteCharts
or ChartView database is inserted in the MFD.
4) Apply power to the system, check that the databases are initialized and
displayed on the power-up screen. A 'Verifying' message may be seen.
If this message is present, wait for the system to finish loading before
proceeding to step 5.
5) Acknowledge the Power-up Page agreement by pressing the ENT Key or
the right-most softkey.
6) Turn the large FMS Knob to select the AUX Page group on the MFD.
7) Turn the small FMS Knob to select the System Status Page.
8) Press the Display Database Selection Softkey to show database information
for each display (MFD1 DB or PFD1 DB). Verify the correct database cycle
information is shown for each database for each display.
9) Remove power from the system.
Loading the Jeppesen Navigation Database as the Active Navigation
Database
The Jeppesen Navigation Database that is loaded to internal memory as the active
database will be used by the system.
NOTE: Loading the Jeppesen Navigation Database as the active database
prior to its effective date will result in the expiration date on the power-up
screen and the effective date on the AUX-System Status Page being displayed
in yellow.
190-00645-07 Rev. A Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Appendix
123
100
™