Database Message Advisories - Garmin G1000 Cockpit Reference Manual

Annunciations & Alerts
Message
PFD1 KEYSTK – PFD1 [key name]
Key is stuck.
PFD2 KEYSTK – PFD2 [key name]
Key is stuck.
MFD1 KEYSTK – MFD [key name]
Key is stuck.
CNFG MODULE – PFD1
configuration module is
inoperative.
PFD1 VOLTAGE – PFD1 has low
voltage. Reducing power usage.
PFD2 VOLTAGE – PFD2 has low
voltage. Reducing power usage.
MFD1 VOLTAGE – MFD1 has low
voltage. Reducing power usage.
[PFD1, PFD2, or MFD1] BKLT CAL
INV – calibration lost or mismatch.
Return for repair.

DATABASE MESSAGE ADVISORIES

Message
MFD1 DB ERR – MFD1 navigation
database error exists.
PFD1 DB ERR – PFD1 navigation
database error exists.
PFD2 DB ERR – PFD2 navigation
database error exists.
92
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Comments
A key is stuck on the PFD and/or MFD bezel.
Attempt to free the stuck key by pressing it
several times. The system should be serviced if
the problem persists.
The PFD1 configuration module backup memory
has failed. The system should be serviced.
The PFD1 voltage is low. The system should be
serviced.
The PFD2 voltage is low. The system should be
serviced.
The MFD voltage is low. The system should be
serviced.
The PFD1, PFD2 and/or MFD backlight
calibration cannot be found or is invalid. The
system should be serviced.
Comments
The MFD and/or PFD detected a failure in the
navigation database. Attempt to reload the
navigation database. If problem persists, the
system should be serviced.
100
190-00645-07 Rev. A
™