Installation - NewLine TRUTOUCH RS Series User Manual

Ventilation
Ensure adequate ventilation and/or an air conditioned environment. We recommend keeping
certain distances from the side of the product to the wall or panels. Ventilation requirements are
shown in following figure:

2.3 Installation

The dimensions of the four bracket mounting holes on the back panel are VESA MIS-F
compliant (TT-9818RS, TT-8618RS or TT-7518RS: 800 x 400 mm/31.50 x 15.75 in; TT-
6518RS: 600 x 400 mm/23.62 x 15.75 in). Use metric M8 screws with a length of 10 mm to
15 mm (0.40 to 0.59 in) to secure the touchscreen to the mounting system. Dimensions of the
mounting holes on the back panel are shown on the following figure:
For any problem, please contact our support desk. Our company is not responsible for any damage or
losses incurred by users if the users fails to follow the instructions.
C
onsult a professional installer to install the display product.
19